Trans Digital
CORPORATION

The Future is in Our Cards


The Future is in Our Cards


Trans PC Card with Parallel Cable
TDC303
Trans PC Card
Universal Parallel Port
with Parallel Cable



How to Order


Trans PC Card
Universal Parallel Port

    Features:

  • Add-on Standard Parallel Port for Notebook PCs to connect printers and other parallel devices ( JTAG chip programers, data acquisition, machine proces control, scientific measurement systems and software protection dongles).

  • Windows XP/2000 auto-install (automatic installation with first insertion of the Card into PC Card slot) and few clicks - easy installation with Windows Vista, Windows 9x, DOS and Linux.

  • Installs as a fully featured bi-directional I/O mapped parallel port as LPT1, LPT2 or LPT3 ( Unlike competitors' parallel port card which only emulates the parallel port ).

  • Fully compatible with IEEE-1284 Parallel Port Standard and with 2.1 (level 5 - highest level of compatibility) PCMCIA Standard , designed with extremely low standby power draw to save battery life.

  • Selected by Siemens AG as a superior add-on parallel port card for Siemens/Fujitsu Notebooks.

  • Preferable Type I Card to fit into all PC Card slots of Notebooks and Mini-Notebooks.

  • 3 years limited warranty.
Standard package TDC303 which includes the card and 1 ft. Parallel Cable with standard female DB25 connector is priced at US$ 125.00   Special Limited Time Offer US$ 98.00
Worldwide shipping is US$ 12.00
  Customer Support:

Trans PC Card with Parallel Cable

For your information:

In modern Notebook PCs the legacy standard parallel port was eliminated.

Notebook PC user has following choices to connect the parallel device using:
  • Low cost USB to Parallel Adapter cable - Converter Cable.
  • Low cost PCMCIA Card (true EPP Port) - Koutech IO-CBP220 which is dual USB card with built in USB to Parallel converters.
Both of the above solutions emulate the parallel port only. They are not real parallel ports and provide very limited parallel port functionality.
The USB to parallel converters will not work with applications which require direct access to the parallel port registers: Data acquisition, JTAG programmers, software protection dongles etc. The USB to parallel converter hardware requires special drivers and must be driven by Windows XP or 2000 to support USB over the CardBus.
  • The EPP PCMCIA Parallel card
    Note that EPP standard was developed in late 80-ties to speed up the parallel port with PCs running at that time at 12 or 16 MHz. With today's Notebook PCs running over 100 times faster the EPP is obsolete and is mainly used for marketing purposes only. The EPP old standard over last 6 years is not any more supported by Microsoft and major PC manufacturers.

  • And the ultimate solution...
    The Trans PC Card - Universal Parallel Port PCMCIA card.
    The card we offer here is a real parallel port, mapped to the standard port I/O addresses. It is driven by Microsft drivers of Windows, so there is no need for additional installation/drivers software. The card shows up in the Device Manger as a parallel port LPT1, LPT2 or LPT3. Therefore it is compatible with all parallel devices which can be driven by the fixed parallel ports of desktop PCs. The card may be used in DOS with provided card enabler or with Linux operating systems.
Trans PC, Trans PC Card, Trans Processor, Trans Cable, Transfer Manager and Universal Parallel Port are trademarks of Trans Digital Corporation.